Integra DPC-7.5 - Manual (Page 23)

23
Basic Playback —Continued
The section explains how to select loaded discs.
Notes:
• The type of disc currently selected is shown on the display:
DVD, VCD, or CD (see page 11).
• You can select discs while the DPC-7.5 is stopped or dur-
ing playback.
• You can use the [Disc Skip] button to skip the current disc
and start the next disc. If disc #6 is the current disc, disc #1
will be selected next.
This section explains how to start, pause, and stop playback.
Notes:
• During playback, you can select chapters or tracks by
using the Up [ ] and Down [ ] buttons.
• When you stop playback of a DVD-Video or Video CD, the
DPC-7.5 remembers the point at which playback was
stopped and “Resume” appears onscreen for a few sec-
onds. To resume playback from that point, press the Play
[ ] button. To cancel the Resume function, press the Stop
[ ] button again. The Resume function is reset when
another disc is selected.
• With the Last Memory function you can resume playback
from a specific point even if the disc has been removed (see
page 37).
• Do not move the DPC-7.5 or subject it to vibration during
playback. Doing so may damage your discs or DPC-7.5.
• You can improve the picture quality of paused playback
with the Pause/Still setting (see page 44).
Selecting Discs
Use the remote controller’s Disc
1–6 buttons to select loaded discs.
On the display, the number of the current
disc has a circle around it.
What happens next depends on the type of
disc you selected, as follows:
DVD-Video: Typically a menu appears
onscreen. See page 25.
Video CD: Playback starts automatically.
Audio CD: Playback starts automatically.
MP3/WMA/JPEG: The Disc Navigator
appears onscreen. See page 27.
JPEG-only CD: With some JPEG CDs,
picture thumbnails appear onscreen. See
page 31.
+10
Disc 1 Disc 2 Disc 3
Disc 4 Disc 5 Disc 6
Disc Skip Progressive Dimmer
Step/Slow
Clear
Setup
Top Menu
Return
Audio
Stop
Down FF FR Up
Play Pause
Angle Subtitle
RC- 543DV
Enter
7 8 9
0
Random
Display
Menu
Chain Mode Play Stop Pause Disc Skip
Open /Close
Enter
DPC-7.5
Stop
Disc Skip
Disc1–6
Play/Enter Play
Pause
Pause
Disc Skip
Stop
DVD VCD CD MP3 WMA JPEG
Disc 1 Disc 2 Disc 3
Disc 4 Disc 5 Disc 6
Remote controller
Starting, Pausing & Stopping Playback
■ Start To start playback, press the Play
[ ] button.
Playback starts and the Play indicator
appears on the display.
If the disc is a DVD-Video or Video CD
with PBC (Playback Control), you may
need to start playback from a menu (see
page 25).
The front panel Play [ ] button performs
play and enter functions. The remote con-
troller has separate Play [ ] and [Enter]
buttons.
■ Pause To pause playback, press the
Pause [ ] button.
Playback pauses and the Pause indica-
tor appears on the display.
To resume playback, press the Play [ ]
button.
Playback resumes and the Pause indica-
tor disappears.
■ Stop To stop playback, press the Stop
[ ] button.
Playback stops and the Play indicator
disappears.
DVD VCD CD MP3 WMA
Play
Enter
Play
Remote controller
Pause
Pause
Remote controller
Stop
Stop
Remote controller
✱✷✰-✪.★ ✱✽✱ ✰❉❂n❈❆❍ ✷❂❈❆ ✥✦ ✻❑❆■❅❂❖, ✳❆❃❍❑❂❍❖ ✤✣, ✥✣✣✧ ✤✣:✤✤ ✮M