Intel SERVER BOARD S5520HC - Manual (Page 7)

7
• Intel ®
Workstation Board S5520SC pre-installed in the Intel
®
Sever Chassis SC5650WS
• Support for six tool-free non hot-swap hard drives. Upgradeable to hot swap SAS/SATA 6-drive bay.
• Non-redundant 1000W high efficiency PFC power supply
• Three non-redundant fixed cooling fan with ducting
• Quick Start User’s Guide and Configuration Label
• Cables (one each)
o Front Panel Cable (baseboard header to front panel, pre-routed))
o USB Cable (USB header to chassis front panel, pre-routed)
o Adapter Cable providing two additional SATA power connectors (in cable kit)
o AC power cord is only included in SC5650SCWSNA
• Chassis intrusion switch assembly (pre-routed)
• The workstation system is designed to work with Intel
®
Xeon
®
processor 5500 series with 130W maximum
power, and is compatible with boxed STS100C (Combo) or STS100A (Active) heat sink.
11)
Common accessories include:
Hot Swap Drive Bays:
– AXX6DRV3GEXP: Expander-based 6-drive bay that supports SAS/SATA drives. Requires two free
SAS ports from the SAS personality module or SAS RAID card.
– AXX4DRV3GEXP: Expander-based 4-drive bay that supports SAS/SATA drives. Requires two free
SAS ports from the SAS module or SAS RAID card. Only supported in Intel
®
Server Chassis
SC5600BRP, and SC5600LX.
– AXX6DRV3GR: 6-drive bay that supports SAS/SATA drives. Requires six free SAS or SATA ports.
SAS hard drive support requires SAS connectors from a SAS personality module or SAS RAID Card.
Support 6Gb SAS Hard Drives with compatible 6Gb SAS adapters
– AXX4DRV3GR: 4-drive bay that supports SAS/SATA drives. Requires four free SAS or SATA ports.
SAS hard drive support requires SAS connectors from a SAS personality module or SAS RAID Card.
Only supported in Intel
® Server Chassis SC5600BRP and SC5600LX. Support 6Gb SAS Hard Drives
with compatible 6Gb SAS adapters.
AXX750WPS: Spare 750W power supply module for Intel
®
Server Chassis SC5600LX and SC5600BRP
ARIGRACK: Rack conversion kit (SC5600BASE, SC5600BRP and SC5600LX)
APP3RACKIT: Rack conversion kit (SC5600 chassis family).
AXXRAKSW5: Intel
®
RAID Activation Key AXXRAKSW5 to enable Intel Embedded RAID technology II for SAS
and/or SATA Software RAID 5 on S5520HC, S5500HCV, and S5520SC boards.
APPT600WHPSU: Additional 600W power supply module- required for full redundancy for SC5650BRP only.
APPTHSDBKIT: Cooling and mounting kit required for 6-drive hot-swap backplanes installed in the SC5650 chassis
family. This kit should be used with AXX6DRV3GR
APP3HSDBKIT: Cooling and mounting kit required for 6-drive hot-swap backplanes installed in the SC5650 chassis
family. This kit should be used with AXX6DRV3GEXP.
AXX25DRVADPTR: 2.5” hard drive carrier kit for installing 2.5” SATA or SAS hard drive or Solid State Drive into
3.5” hot swap drive bay