Connecting the dvd player —continued, Video output/video setting matrix, Audio output/audio setting matrixes – Integra DPS-6.7 User Manual
Page 19
19
Connecting the DVD player
—Continued
The following matrix shows how the video outputs work in relation to the various video settings.
*1 Depending on the native resolution of your TV, you may get no picture.
*2 If your TV doesn’t support progressive scanning, you’ll get no picture.
*3 If your TV doesn’t support the HD Resolution settings of 720p and 1080i, you’ll get no picture.
■
Digital Audio Output/Audio Setting Matrix
The following matrix shows how the digital audio outputs work in relation to the Digital/HDMI Audio Out setting.
Audio from SACDs is not output by the HDMI OUT or optical or coaxial digital audio outputs. It’s only output by the analog
audio outputs. Audio from the multichannel area of a DVD-Audio disc is also only output by the analog audio outputs.
*a If your TV or amp doesn’t support higher sampling rates, set the Linear PCM Out setting to Down Sample On (page 48).
*b Dolby Digital and DTS sources will be converted to PCM. If your TV or amp doesn’t support Dolby Digital and DTS, choose this
option.
■
Analog Audio Output/Audio Setting Matrix
The following matrix shows the recommended audio settings for each analog audio output.
*c If your TV or multichannel amp has a Dolby Pro Logic decoder built in, by setting the Downmix Setting (page 50) to Lt/Rt,
multichannel sources can be down mixed and output as an Lt/Rt mix.
Video Output/Video Setting Matrix
Setting
Video output
HDMI Output Setting (page 27)
On (default)
Off
HD Resolution setting (page 43)
Progressive Setting (page 43)
Auto
480p/576p
(default)
720p, 1080i
Progressive
Interlaced
HDMI
✓
✓
✓
*3
No output
No output
Component
✓
*1
✓
*2
No output
✓
*2
✓
S-Video
✓
*1
✓
No output
✓
✓
Composite
✓
*1
✓
No output
✓
✓
Audio Output/Audio Setting Matrixes
Setting
Digital
audio output
Digital/HDMI Audio Out setting (page 48)
All (default)
*a
PCM
*a
Off
HDMI
✓
✓
*b
No output
Digital (optical & coaxial)
✓
✓
*b
No output
Setting
Analog audio
output
Speaker Configuration (page 48)
SACD Audio Setup (page 49)
5.1 channel (default):
Subwoofer: On
Front: Small
Center: Small
Surround: Small
2 channel:
Subwoofer: Off
Front: Large
Center: Off
Surround: Off
DSD (default)
PCM
2-channel (FRONT/D.MIX)
✓
*c
✓
Multichannel
✓
✓