I-Tech Company CMP2000N User Manual
Page 11
TOLL FREE: (888) 483-2418 • EMAIL:
• WEB:
www.i-
techcompany.com
a) IP or Hostname: Type in static IP for local LAN server or hostname for remote internet
server. Example: 192.168.1.100 or
miatech.blogdns.com
b) Port: Default is 5021 but if 5021 is already in use on server side, please reassign a
different port. Make sure the port number is the same in CAT and your router
c) Client Account Name and Password: Type in user name and password for this client
device. After client powers up and logs into CAT server, it will go to its assigned group.
d) DHCP or Static IP: Select Dynamic IP by router or fixed static IP for client device
e) Time Zone: Select your local time zone
f) Daylight Saving: If checked, one hour will be added
g) Reboot time: If checked, client will reboot at set time
h) Video output: Selecting S-Video will include composite video. You can use 'Angle' key
from remote to switch at main menu i) Off/Local CF/Internet URL Address: If Internet
URL Address is selected, type in URL
address and playlist filename so client will download playlist and execute
j) Interval time for Network autostart: check if any new playlist is updated based on this
interval time.
k) Update Client: This is a remote command which will send current settings to all client
devices of the selected group. Client device will reboot after settings are saved into
EEPROM. It will take approximately 30 seconds from reboot to re-login.