I-Tech Company CMP2000N User Manual
Page 6
TOLL FREE: (888) 483-2418 • EMAIL:
• WEB:
www.i-techcompany.com
3. Client Setup Screen
-
Use remote control to navigate and make necessary changes
-
Press ENTER from main menu to enter CMP2000N's setup screen
-
Listed options include Network, Time, AutoStart, Return to Main menu, and Save and reboot
-
Press ENTER on any item to go to its screen
Network Setup Screen
a. User Name and Password: Use “Select” or “Goto” key to open virtual keyboard. Move
cursor to any letter and press ENTER, or use '0' (zero) to erase letter. Once finished,
press “Select” or “Goto” again to exit virtual keyboard mode. Press ENTER key on 'user
name' or 'password' to go to next screen
b. Server IP and Host Name: Move cursor to select 'Server static IP' or 'Host Name'. Use
numeric key pad of remote to input in the static IP or use virtual keyboard to type in 'Host
Name'. Press ENTER to go to next page
Note: If the computer running CAT is located behind a static IP, then use 'Server static
IP'. If your IP is dynamic, please register your IP to be forwarded by a dynamic DNS
service and type in your DDNS address into 'Host Name'.
Please see the last page for
additional information
c. CMP2000N Client DHCP or Static IP: Move cursor to select 'DHCP' or 'Static IP' and
press
ENTER (DHCP is recommended.)
Time Setup Screen
a. Time Server: Press cursor left or right to select
'time.nist.gov'
or
'windows.time.com'
.
Press cursor down to move to next item
b. Date: you can ignore this because client board will obtain internet time during power
up unless there is no internet connection
c. Time: See above
d. Time Zone: Press cursor left or right to select your local time zone
e. DST(Day Saving Time): Press cursor to select On or OFF. If On, it will add one hour
f. Reboot Time: Move cursor to select 'OFF' or type in 2 digits for daily reboot time.
When time is up, client will reboot itself.
g. Press ENTER on any field to go back to Setup screen
Auto Start Screen
a. OFF:
After power up, client will do nothing and wait for server's command
b. Local CF: After power up, client will playback according to playlist file stored in the
CF card or playback A-Z order files without playlist file
c. Network:
Use virtual keyboard to enter network URL path. After power up, client will
go to this URL path to download playlist file and execute action item listed in the
playlist file. (also described on page 2 item IV)
Return to Main Menu: will return to main menu
Save and Reboot: save all the changes and reboot client
Note-1: Client setup settings can be modified under the “Client Setup Utility” in CAT software. You
can save as “autoconfig.mia” onto CF card then insert into CF slot of CMP2000N and power up.
Screen will show “Auto Updating” message and save into EEPROM. Remove CF card and delete
this file to avoid reloading again.