iLive IS819B - Manual (Page 13)

13
iPod oPerations
13. Pair Button
Press the Pair Button to pair the unit to
wireless speakers.
14. reset Button
Use a paperclip or like object to press
the Reset Button and reset the unit to it’s
default settings.
15. auxiliary input
Use the auxiliary Input to connect an
MP3 player or other audio source to the
unit.
16. volume dial
turn the volume Dial to adjust the
volume of the speaker.
the included speakers have independent
volume controls that can be used to
fine tune the volume of the individual
speakers.
The Volume Buttons on the remote control
will adjust the master volume of the unit,
affecting all linked speakers.
17. left/right/mono Button
turn the Left/Right/Mono Button to
switch between left, right, and mono
speaker modes.
18. Battery Compartment (requires 6 d
batteries, not included)
19. aC Power Cord
Use the aC Power Cord to power the
speakers as an alternative to using battery
power.
20. fm Wire antenna
Use the FM Wire antenna to improve FM
radio reception
An AM antenna is built into the unit.
Adjust the position of the unit to improve
AM radio reception.
21. aC Power Cord
Use the aC Power Cord to power the
speakers as an alternative to using battery
power.
22. Power Button
Press the Power Button to turn the
speakers on and off.
23. Pair Button
Press and hold the Pair Button to have the
speaker search for a nearby unit to link to.
24. link indicator
off- the unit is powered off.
flashing- the unit is in Standby Mode.
Blinking- the unit is attempting to pair with
nearby wireless speakers.
solid- the unit is paired with one or more
nearby wireless speakers and playing.