Intermate 100 - Manual (Page 151)

Intermate100 and Intermate101 Print Server Administration Manual 151
[Logical Printers 1-8]: Introduction
20. [Logical Printers 1-8]
20.1. Introduction
All eight configurable logical printers are set up on a single
configuration page in the HTTP interface. Each set of parame-
ters is labelled “Logical Printer #” and lines are used to sepa-
rate the sets from each other.
For each configurable logical printer PR1 - PR8 there are five
fields: one mandatory, one conditionally mandatory, and three
optional fields.
Target Printer (1-2 mandatory fields)
You must choose a target printer from the drop-down list for
that field.
If you use the NDO and choose “pool” instead of a single tar-
get, you must also define the pool in the field following. Printers
in a pool must all function identically (as described in
““Load
Balancing Pools” (NDO only)” [page 132] ).
Up to 3 optional fields for data manipulation
• String Before
• String After
• String Substitutions
Order of fields within each set
On the configuration page, the optional fields appear first in the
set of parameters defining a logical printer, while the target
printer definition comes last.