Intel SR9000MK4U - Manual (Page 24)

2 Intel ® Server System SR9000MK4U Product Guide
Chassis Description
Features are outlined in Table 3.
Table 3. Chassis Feature Summary
Feature Comment
Server Configuration
•
Stand-alone system including external I/O PCI slots and
disk expansion as needs grow
•
Support for Intel ® Itanium ® 2 processors
•
Support for 533 MHz Front Side Bus (FSB)
•
Support for Double Data Rate-2 (DDR-2) 533 Synchronous
Dynamic Random Access Memory (SDRAM)
•
Support for PCI Express* x4/x8/x16
Expansion and Servicing
•
Up to four Intel ® Itanium ® 2 processors
•
Up to 32 DIMM sockets with max 256 GB memory capacity
•
Two 64-bit PCI-X* slots
•
Two x8 PCI-Express* slots
•
Two x16 PCI-Express slots
•
Up to eight hot-swappable 3.5-inch SAS 3G hard drives
with front/external access
•
Two hot-swap 1390 W power supplies in a redundant
power cords when using 200-240 VAC configuration with
redundant power cords (one cord per power supply). If 100
- 110 VAC is used, both power supplies must be connected
for the server system to operate, and redundancy is not
available.
•
Six top access hot-swap system fans in a redundant (5+1)
configuration
•
Dockable slimline optical drive
•
Status indicator LEDs
Management
•
Intelligent Platform Management Interface (IPMI) 2.0
compliant
•
Remote management across the LAN
•
Remote diagnostics support across the LAN
•
Remote KVM across the LAN
•
Remote optical drive access across the LAN
Upgrades
•
Field upgradeable to the next generation Intel ® Itanium ®
processor family
•
Multi-generational chassis