Iiyama LM704UT - Manual (Page 12)

ENGLISH
Degauss should not be repeated
continuously. Wait at least 30 minutes between
degaussing operations. While degaussing, the
picture shakes and a low sound occurs but this
does not indicate a problem, it is normal.
8 OPERATING THE MONITOR
To correct
t i l t
To correct
distortion
To correct
distortion
To correct
distortion
To correct
distortion
Moire is the result of interference between
the phosphor layout and the video signal. In some
case, you may find the moire very noticeable.
Press OSD menu to enter in the moire reduce
setting. Please adjust the level to the optimum
condition. Too high of a setting will cause the picture
to shake.
Every time the monitor is switched
on, the monitor is automatically
degaussed. But occasionally the
colors change when moving or
swiveling the monitor. In this case,
first try the tilt adjustment. If the
problem persists, select Degauss.
NOTE
ADJUSTMENT MENU CONTENTS
Menu
Too dull
Too intense
Too dark
Too bright
Problem / Option Button to Press
Too small
Too large
Too far to the left
Too far to the right
Too small
Too large
Too low
Too high
Contrast *
Too small
Too large
Brightness *
H-Center
H-Size
V-Center
Pincushion
Trapezoid
Pin-Balance
Parallelogram
Rotation
OSD Center
User Color
Zoom
Menu
Temperature
(in K: Kelvin)
Red
Blue
R
G B
9300 9300K: Normal white
6500 6500K: Warmer white
5000 5000K: Paper white
Degauss
NOTE
Problem / Option Button to Press
V-Size Moire Reduce
H-Moire Reduce
H-Convergence
Recall
Exit
Language
EXIT
Eng Deu Fra
Esp It a Por
Close OSD window.
Performing this operation resets any
adjustment data made by the user to the factory-
preset frequencies. The following settings remain
unchanged.
Factory-preset data is restored.
Contrast: Press the + Button.
Brightness: Press the – Button.
NOTE
Exit Button also can be used. NOTE
Color Moire
*
Direct
MENU
MENU
MENU
MENU
MENU