Intel SBC-776 User Manual
Page 96
Chapter 4 Drivers
2.3 Installation Procedures for WIN NT4.0
*Please copy the 82562ET driver from the CDROM
onto Floppy Disks and insert into floppy drive*
~~>Click on Start button
~~>Click on Settings button
~~>Click on Control Panel button
~~>Double click on Network
~~>Click on Yes
~~>Click on Next
~~>Click on Select from List........
~~>Click on Have Disk
~~>Click on OK
~~>Click on OK
~~>Appear Intel Pro Adapter
~~>Click on OK
~~>Click on Next
~~>Select TCP/IP Protocol, NWlink IPX/SPX
Compatible Transport, NetBEUI Protocol (PS: This
depends on your system)
~~>Click on Next
~~>Click on Next
~~>Click on Next
~~>Type the WIN NT4.0 CDROM path (such as E:)
and then click on continue, setup will continue.
~~>Appear Do You want to use DHCP? (PS:Depends
on your system). Click on No.
~~>Setup your TCP/IP Properties
~~>Click on Next
~~>Click on Next