Ingersoll-Rand PD05P-XXX-XXX-B - Manual (Page 5)

PD05P-XXX-XXX-B (en) Page 5 of 8
22
19
21
29
77
27
15
21
22 29
19
60 (PD05P-XES-XXX-B,
PD05P-XLS-XXX-B,
PD05P-XRS-XXX-B)
63
60 (PD05P-XDS-XXX-B,
PD05P-XKS-XXX-B,
PD05P-XPS-XXX-B)
18
26
61 (PD05P-XES-XXX-B,
PD05P-XLS-XXX-B,
PD05P-XRS-XXX-B)
63
61 (PD05P-XDS-XXX-B,
PD05P-XKS-XXX-B,
PD05P-XPS-XXX-B)
17
43
6 27 1 7 5
ASSEMBLY TORQUE REQUIREMENTS
NOTE: DO NOT OVERTIGHTEN FASTENERS.
(6) diaphragm nut, 95 - 105 in. lbs (10.7 - 11.9 Nm).
(26) bolt and (29) nut, 50 - 60 in. lbs (5.6 - 6.8 Nm), alternately and evenly,
then re-torque after initial run-in.
LUBRICATION / SEALANTS
Apply Lubriplate FML-2 grease to all “O” rings, “U” cups and mating parts.
Apply pipe sealant to threads.
Apply anti-seize compound to threads and bolt and nut flange heads
which contact pump case when using stainless steel fasteners.
Apply Loctite® 242® to threads.
Note: Lubriplate FML-2 is a white food grade petroleum grease.
PARTS LIST / PD05P-XXX-XXX-B FLUID SECTION
FOR THE AIR MOTOR SEC-
TION, SEE PAGES 6 AND 7.
Figure 3
COLOR CODE
Diaphragm Ball
Material Color Color
Hytrel Cream Black (•)
Nitrile Black Red (•)
Polyurethane Clear Red
Santoprene Tan Tan
Tefl on PTFE White White
Viton Yellow (•) Yellow (•)
(•) Dot
5
7
2
3
8
6
4
1
Torque Sequence
View for PD05P-XXS-XXT-B (Tefl on
diaphragm) confi guration only.
Fluid side, Teflon (white) - 7
8 - Air side, Santoprene ( tan)