Invacare DLX - Manual (Page 33)

33
PROCEDURE 8 RECLINER
REMOVING/INSTALLING THE REAR
WHEELS (FIGURE 5)
Removing
1. Note mounting position of EXISTING rear wheel.
2. Remove the axle mounting screw and locknut that
secure the EXISTING rear wheel and spacer to
the wheel offset bracket.
3. Remove the EXISTING rear wheel from wheel
offset bracket.
Installing
1. Secure the new/existing rear wheel and spacer
to wheel offset bracket with axle mounting screw
and locknut. Securely tighten.
R
E
C
L
I
N
E
R
Axle Mounting Screw
Rear Wheel
Spacer
Rear Wheel
Offset Bracket
Locknut
FIGURE 5 - REMOVING/INSTALLING THE
REAR WHEELS
Rearward
Mounting
Positions
Rear Wheel Offset
Bracket
X
X
Forward Mounting
Positions
(DO NOT USE)
WARNING
TRACER SX RECLINER ONLY: Mount the rear
wheels in the Rear Wheel Offset Bracket ONLY.
NEVER reposition the rear wheels to the forward
position, stability of the wheelchair will de-
crease, and injury or damage may result.
NOTE: If changing rear wheel size refer to CHANGING
SEAT TO FLOOR HEIGHT in PROCEDURE 8 of this
manual BEFORE performing this procedure.