Invacare JYMNI 9000 - Manual (Page 3)

Part No. 1058751 3 9000 Series and Jymni™ Anti-tippers
9000 SERIES ANTI-TIPPER CHARTS (FIGURE 3)
NOTE: Refer to the following charts to ensure the correct anti-tipper is installed on the wheelchair.
Seat-to-Floor heights are approximate depending on front caster size and type. Refer to SECTION
5 of the service manual, part number 1076155, for an explanation of frame types. Anti-Tipper
length measurement is taken with the extension tube in the LONGEST position available. The
anti-tipper height measurement MUST be taken with the anti-tipper on a flat surface.
Anti-Tipper Length
Flat Surface
Anti-Tipper
Height
9000 XT (SUPER LOW FRAME)
CASTER SEAT-TO-FLOOR ANTI-TIPPER ON CHAIR OFF CHAIR
SIZE HEIGHT LENGTH, HEIGHT KIT NUMBER
6-inch 13-1/2 and 14-1/2-in. 10-1/2, 2-inches 1360SH 1064520
9000 XDT (ADULT TALL FRAME)
CASTER SEAT-TO-FLOOR ANTI-TIPPER ON CHAIR OFF CHAIR
SIZE HEIGHT LENGTH, HEIGHT KIT NUMBER
8-inch 17-1/2 and 19-1/2-in. 11-5/8, 2-3/4-inches 1360A 1058752
8-inch 21-1/2-in. 13-1/2, 3-1/2-inches 1360 1058836
9000 XT WITH 3° SEAT-TO-FLOOR ANGLE AND 9000 SL (ADULT/HEMI FRAMES)
CASTER SEAT-TO-FLOOR ANTI-TIPPER ON CHAIR OFF CHAIR
SIZE HEIGHT LENGTH, HEIGHT KIT NUMBER
8-inch 17-1/2, 18-1/2, 19-1/2-inches 13-1/2, 3-1/2-inches 1360 1058836
6-inch 15-1/2, 16-1/2, 17-1/2-inches 11-5/8, 2-3/4-inches 1360A 1058752
9000 XT WITH 6° SEAT-TO-FLOOR ANGLE (ADULT/HEMI FRAME)
CASTER SEAT-TO-FLOOR ANTI-TIPPER ON CHAIR OFF CHAIR
SIZE HEIGHT LENGTH, HEIGHT KIT NUMBER
8-inch 17-1/2, 18-1/2, 19-1/2-inches 13-1/2, 2-7/8-inches N/A 1113766
6-inch 16-1/2, 17-1/2-inches 12-1/2, 2-3/4-inches N/A 1113765
15-1/2-inches 9-1/2, 2-3/8-inches N/A 1113764
9000 XT WITH 0° SEAT-TO-FLOOR ANGLE (ADULT/HEMI FRAME)
CASTER SEAT-TO-FLOOR ANTI-TIPPER ON CHAIR OFF CHAIR
SIZE HEIGHT LENGTH, HEIGHT KIT NUMBER
8-inch 17-1/2, 18-1/2-inches 13-1/2, 3-1/2-inches N/A 1058836
6-inch 16-1/2, 17-1/2-inches 13-1/2, 3-1/2-inches N/A 1058836
15-1/2-inches 11-5/8, 2-3/4-inches N/A 1058752
FIGURE 3 - ANTI-TIPPER MEASUREMENT