Insignia NS-1DVDR - Manual (Page 11)

9
www.insignia-products.com
To replace the batteries:
1 Press the lock tab of the battery holder and
open the battery compartment.
2 Place two AAA batteries in the battery holder,
matching the + and – in the battery
compartment.
3 Close the battery holder.
Using your recorder
Turning your recorder on and off
To turn your recorder on and off:
1 Plug the power cord into the back of your
recorder and into an electrical outlet.
2 Press the POWER button to turn on your
recorder.
3 Press the POWER button again to turn off
your recorder.
Initial Setup Wizard
The first time you turn on your recorder, the
Initial Setup Wizard opens so you can set the
language and clock.
To set up your recorder with the Setup
Wizard:
1 Use / to select a language for the Setup
menu and on-screen display, then press
ENTER.
2 Enter the necessary information for year,
date, and time.
• / (left/right): Moves the cursor to the
previous or next column.
• / (up/down): Changes the setting at
the current cursor position.
3 Press ENTER to confirm your setting.
4 Press ENTER to exit the menu.
P l ay i ng a disc
To play a disc:
1 Turn on your recorder.
2 Press OPEN/CLOSE ( ) to open the disc
tray.
3 Load the disc into the tray, with the label side
up.
4 Press OPEN/CLOSE ( ) to close the tray.
Playback starts automatically. If playback
does not start, press PLAY (
) or start the
playback using the HOME menu (see “Using
the Home Menu” on page 11).
5 To stop the playback, press STOP ( ).
6 The recorder records the stopped point,
depending on the disc. appears on the
screen briefly.
Press PLAY ( ) to resume playback (from
the stopped point). If you press STOP ( )
again or unloaded the disc, ( appears on
the screen. If you press PLAY ( ), your
recorder starts playback at the beginning of
the disc.
7 Press OPEN/CLOSE ( ) to open the tray
and remove the disc.
Press OPEN/CLOSE ( ) to close the disc
tray, or press POWER ( ). The disc tray
closes automatically and recorder turns off.
Disc playback features
Caution
• Use only the size and type of batteries
specified.
• Make sure that you follow the correct polarity
as indicated in the battery compartment.
Reversed batteries may damage the remote
control.
• Do not mix different types of batteries together
(for example, Alkaline and Carbon-Zinc) or old
batteries with new ones.
• If the remote control is not to be used for a long
period of time, remove the batteries to prevent
damage or injury from possible battery
leakage.
• Do not try to recharge batteries not intended to
be recharged. They can overheat and rupture.
Note
You can reset the Initial Setup Wizard from the
Factory Set option in the setup menu (see
“General Settings” on page 11).
Note
If parental control are set and the DVD is not
within the rating settings, you must input the
password.
(See “Lock (Parental Control) Settings” on
page 12).
Buttons Operations Discs
OPEN/CLOSE
(
)
Press to open or close the disc
tray. All
PAUSE ( ) Press to pause playback. All
Press repeatedly to play
frame-by-frame.
Note: You can also use the /
buttons to step backward or
forward while in PAUSE mode.
DVD ALL