Integra DTR-7.8 - Manual (Page 47)

47
First Time Setup —Continued
Notes:
• Each HDMI IN cannot be assigned to more than one
input selector.
• For composite video, S-Video, and component
video upconversion for the HDMI OUT, the HDMI
Monitor setting must be set to Yes (see page 45).
See page 27 for more information on video signal flow
and upconversion.
• When an HDMI IN is assigned to an input selector as
explained here, the digital audio input for that input
selector is automatically set to the same HDMI IN.
See “Digital Input Setup” on page 50.
• This procedure can also be performed on the AV
receiver by using its [Setup], [Enter], and arrow but-
tons.
1 Press the [Receiver] button, fol-
lowed by the [Setup] button.
The main menu appears onscreen.
2 Use the Up and Down [ ]/[ ]
buttons to select “1. Input/Output
Assign,” and then press [Enter].
The Input/Output Assign menu
appears.
3 Use the Up and Down [ ]/[ ]
buttons to select “2. HDMI Input,”
and then press [Enter].
The HDMI Input menu appears.
4 Use the Up and Down [ ]/[ ]
buttons to select an input selec-
tor, and use the Left and Right
[
]/[ ] buttons to select:
IN1: Select if the video component
is connected to HDMI IN 1.
IN2: Select if the video component
is connected to HDMI IN 2.
IN3: Select if the video component
is connected to HDMI IN 3.
- - -: Select this to upconvert and
output composite video,
S-Video, and component
video sources from the HDMI
OUT.
5 Press the [Setup] button.
Setup closes.
Receiver
Setu
p
Enter
Enter
Enter
Enter
1-2.HDMI Input
DVD ---
VCR/DVR ---
CBL/SAT ---
GAME/TV ---
AUX1 ---
AUX2 ---
Enter
Enter
Setu
p