Impex MWM7150 - Manual (Page 12)

STEP 3 (See Diagram 3)
A.) Attach the Front Press (#4) to the Upper Frame (#3). Secure it with one Front Press Axle
(#27), two Ø ¾” Washers (#59), and two M10 Aircraft Nuts (#56). Do not over tighten the
Nuts. Make sure the Front Press can move smoothly.
B.) Insert the two Front Press Handles (#15) into the arms of Front Press. Secure each Handle
with one M10 x 1” Allen Bolt (#47) and one Ø ¾” x Ø 1” Curved Washer (#62).
C.) Attach the Backrest Board (#30) to the Vertical Frame (#2). Secure it with two M8 x 2 ½”
Allen Bolts (#51) and two Ø 5/8” Washers (#58).
DIAGRAM 3
11