Intel GS-SR168 - Manual (Page 36)

3 6
GS-SR168 Rack Mount Server
Peripheral Configuration
PhoenixBIOS Setup Utility
Peripheral Configuration Item Specific Help
Serial Port A [Enabled]
Base I/O address/IRQ [3F8/IRQ4]
Serial Port B [Enabled]
Base I/O address/IRQ [2F8/IRQ3]
Floppy disk connector [Enabled]
Floppy Check [Enabled]
Parallel ATA [Both]
Serial ATA [Enabled]
Native Mode Operation [Auto]
SATA RAID Enable [Disabled]
F1: Help KL : Select Item + -: Change Values F5: Setup Defaults
Esc: Exit IJ : Select Menu Enter: Select Sub-Menu F10: Save&Exit
Serial Port A
This allows users to configure serial prot A by using this option.
Disabled Disable the configuration.
Enabled Enable the configuration (Default value)
Base I/O Address/IRQ
3F8/IRQ4 Set IO address to 3F8. (Default value)
2F8/IRQ3 Set IO address to 2F8.
3E8/IRQ4 Set IO address to 3E8.
2E8/IRQ3 Set IO address to 2E8.
Figure 2-4: Peripheral Configuration