Intel GS-SR168 - Manual (Page 41)

4 1
BIOS Setup
Security
Figure 3: Security
* ** ** About This Section: Security
In this section, user can set either supervisor or user passwords, or both for different level of
password securities. In addition, user also can set the virus protection for boot sector.
Set Supervisor Password
You can install and change this options for the setup menus. Type the password up to 6
characters in lengh and press <Enter>. The password typed now will clear any previously
entered password from the CMOS memory. You will be asked to confirm the entered
password. Type the password again and press <Enter>. You may also press <Esc> to abort
the selection and not enter a specified password or press <Enter> key to disable this option.
PhoenixBIOS Setup Utility
Main Advanced Security Server Boot Exit
Supervisor Password Is: Clear Item Specific Help
User Password Is: Clear
Set Supervisor Password [Enter]
Set User Password [Enter]
Password On Boot [Disabled]
F1: Help KL : Select Item + -: Change Values F5: Setup Defaults
Esc: Exit IJ : Select Menu Enter: Select Sub-Menu F10: Save&Exit