Interphase Tech iSPAN 5535 PRI - Manual (Page 64)

Installing and Setting Up the Drivers
44 Interphase Corporation
To check the IDSN line using LoopTest:
1. Before executing LoopTest, and to avoid incoming call
conflicts, disable the RAS Server, as follows:
a. From the Start menu, select Programs, then
Administrative Tools (Common), and then
Remote Access Admin. The following dialog
appears:
Figure 4-17. Remote Access Admin Dialog
b. From the Server menu, select Stop Remote Access
Service.
2. After the RAS server is stopped, from the Start menu,
select Programs, then INTERPHASE WAN
Adapters, and then LoopTest.
The LoopTest dialog appears: