Icom IC-M422 - Manual (Page 34)

28
6
DSC OPERATION
New2001
D Receiving a Position Request call
While monitoring Channel 70 and a Position Request call is
received:
➥ “DSC” appears and “
” scrolls at the chan-
nel comment indicator.
➥ The beeps sound for 2 minutes.
• Push any key to stop the beeps.
➥ Push [DSC• POS ] to reply to the call; push any other key to
ignore the call.
D Receiving a Position Report call
While monitoring Channel 70 and a Position Report call is re-
ceived:
➥ “DSC” appears and “
” scrolls at the chan-
nel comment indicator.
➥ The beeps sound for 2 minutes.
• Push any key to stop the beeps.
➥ Push [DSC• POS ] to reply to the call; push any other key to
ignore the call.
D Receiving a Polling Request call
While monitoring Channel 70 and a Polling Request call is re-
ceived:
➥ “DSC” appears and “
” scrolls at the
channel comment indicator.
➥ The beeps sound for 2 minutes.
• Push any key to stop the beeps.
➥ Push [DSC• POS ] to reply to the call; push any other key to
ignore the call.
D Receiving a Position Request Reply call
While monitoring Channel 70 and a Position Request Reply
call is received:
➥ “DSC” and “POS REPLY” appear in the display.
• The ‘Latitude’ and ‘Longitude’ from the called station is displayed
and scrolled at the channel comment indicator in order of Lati-
tude co-ordinates and then Longitude co-ordinates.
• “ ” scrolls when no GPS is connected.
➥ The beeps sound for 2 minutes.
• Push any key to stop the beeps.
Scrolls
Scrolls
Scrolls
Scrolls
!IC-M422.qxd 05.2.23 2:21 PM Page 28 (1,1)