Integra MZA-4.7 - Manual (Page 24)

24
Programming Using IMC (Integra Music Center)—Continued
• Volume Levels
The volume sliders may be changed either by left clicks above or below the displayed level, or by dragging the level
down using a left click and hold.
Note: If the amplifier is in “Tracking” mode then changing one volume changes the other.
• Maximum Volume Limit
The maximum volume limit is set firstly by identifying the slider with a left mouse click, then on the keyboard hold
down the “Shift” key and adjust the level using the “Up” and “Down” keys. The limit is indicated above the slider
level by a black bar as shown above in the Kitchen’s volume slider.
• Preamplifier Tracking / Independent Mode
The chain link button between the volume sliders is used to toggle the preamplifier volume tracking mode. When
the chain symbol is unbroken the preamplifier volume tracks the amplifier volume. An offset between the preampli-
fier and amplifier volume may be made by identifying the volume bar to be changed with a left click, then make the
change on the keyboard by holding down the “Ctrl” key and adjust the level using the “Up” or “Down” keys.
When the chain link button is broken, the preamplifier is in “Independent” mode.
While in independent mode the preamplifier volume may be adjusted independently from the amplifier volume
with one restriction: the maximum difference between the preamplifier and amplifier volume level is < 68.
• All Off
Left mouse clicks while over the “All OFF” button turns OFF all MZA-4.7 zones.
• Setup
Opens the Setup Window giving access to the occasionally used functions.
• Preset 1 - 6
Momentary Presets. These are used for creating scenes and alarm clock events.
• Preset Setup
Opens the Preset Setup Window where the alarm clock and presets are programmed.