Integra MZA-4.7 - Manual (Page 25)

25
Programming Using IMC (Integra Music Center)—Continued
The window provides the means to control the occasionally used functions like bass, treble, amplifier and preamplifier
balance and loudness. These are all adjusted using a left mouse click while above the button or slider.
Note:
The preamplifier and amplifier share the same bass and treble control.
Loudness is defeated when the preamplifier is set to “Independent Mode”.
Any one zone may be linked to one other zone by left clicking the “Link Zone” down arrow, and making the selection
from the zone list. Linked zones have the same source selection. Volume and standby may also be linked using the “Link
Volume” and “Link Standby” Tabs. If both volume and standby are selected then the two zones are fully linked and
completely mimic each other.
The “Ampon” outputs on the MZA-4.7 default to tracking the preamplifier “ON” status. However when in independent
mode it may be useful for the “Ampon” output to be assigned to the amplifier. Select using a left click on the Amp tab.
Setup Window