Setting the time, To set the time, Using your shelf system – Insignia NS-A2110 User Manual

Page 9: Using the radio, To use the radio

Advertising
background image

9

Insignia NS-A2110 Executive Shelf System

www.insignia-products.com

Setting the time

To set the time:
1
Plug in your shelf system and turn it on by pressing the POWER

button.

2 Press and hold the TIME SET button, then press the HOUR button

until the correct hour is shown on the display.

3 Press the MINUTE button until the correct minute is shown on the

display.

4 Turn off the shelf system by pressing the POWER button.

Using your shelf system

Using the radio

To use the radio:
1
Press the POWER button to turn on the shelf system.

2 Slide the function selector to RADIO.

3 Slide the band selector to FM ST. (stereo), AM, or FM.

4 Rotate the TUNING knob to the station you want.

For FM listening, adjust the antenna for the best signal.

For AM listening, rotate the player for the best signal (it has a
built-in antenna).

5 Adjust the sound level with the VOLUME control.

6 For private listening, plug your stereo headphones into the stereo

headphone jack on top of the player. The speakers mute
automatically.

7 To turn the radio off, press the POWER button.

Note

The FM Stereo indicator LED lights when you tune to an FM
stereo station, if the BAND selector is set to FM ST.

Warning

To avoid damaging your hearing, set the volume to a low
level before putting on the headphones, then adjust the
volume up to a comfortable level.

Advertising