Intermec Mobile PB3 - Manual (Page 16)

6 PB3 Mobile Printer User’s Guide
After about three hours the Battery LED turns off. The battery is
fully charged.
Using the 2-Bay Battery Charger
Use the 2-bay battery charger to charge the batteries.
To use the 2-bay charger
1 Plug the AC adapter into the 2-bay charger.
2 Connect the adapter to AC power. The Status LEDs turn green,
indicating that the charger is ready to use.
3 With the contacts on the bottom and the arrow pointing toward
the LEDs, place a battery into one of the bays.
12
6
9 3
1
2
7
8
10
11
4
5
Note: The wall mounted charger is Class II equipment. Multiple
plug configurations comply with most international standards.
The wall mounted charger is not supplied with plugs for use in
Korea.
Status LEDs