Intermec Mobile PB3 - Manual (Page 25)

PB3 Mobile Printer User’s Guide 15
Changing Printer Connection Settings
Connection settings are changed by the DIP switches located inside
the battery compartment.
Follow the next procedure to change DIP switch settings.
To change printer settings with the DIP switches
1 Open the battery door and remove the battery. The DIP switches
are located inside the battery compartment.
The DIP switches are numbered 1 to 8 from left to right. By
default, all DIP switches are off (toggled away from the
configuration label inside the battery compartment) except for
switch 2.
Use caution when changing DIP switch settings. Carefully use a
pointer on the dip switch to toggle its position. Do not use a
screwdriver and do not apply excessive force.
DIP switches