Integra PLA-50V1 - Manual (Page 7)

1
• This device cannot be installed on its own.
Be sure to use a stand or mounting unit
designed for Plasma Monitor PLA-50V1. (Wall
mount unit, Stand, etc.)
• For correct installation and mounting it is
strongly recommended to use a trained,
authorized Integra dealer.
Failure to follow correct mounting
procedures could result in damage to the
equipment or injury to the installer.
Product warranty does not cover damage
caused by improper installation.
Ventilation Requirements for
enclosure mounting
To allow heat to disperse, leave space between
surrounding objects as shown on the diagram
below when installing.
How to Mount the Plasma Monitor
50 mm (2")
1240 mm (48.8")
766
mm
(30.2")
50 mm (2")
50
mm
(2")
50
mm
(2")
Wall
Wall
50 mm (2")