I.R.I.S. DC1100 - Manual (Page 36)

Coaxial Networks, Inc. Page 36 of 60
Using a serial (RS232) 9 pin null modem cable connect your PC’s serial port to the serial console
port of IRIS. Now you can use tools such as “HyperTerminal” in Windows to connect to IRIS.
The settings for the serial console port of IRIS are
Baud Rate: 57600
Data Bits: 8
Parity: None
Stop Bits: 1
Flow Control: None
After successfully connecting to the console port you should see the IRIS “login” prompt.
Logging In
At the login prompt, type the username as “iris” and hit enter. At the “password” prompt type
“123456” or the new password if you have already changed the default password.
After you have successfully logged in you are greeted by the “IRIS>” prompt.
Figure 20 IRIS CLI prompt
“help” command
You can type “?” or “help” on the IRIS prompt to see the list of CLI commands available.
You can type “?” or “help” on the IRIS prompt to see the list of CLI commands available.
IRIS>?
(h)elp ......................... list usage
count .......................... print packet counters
rcount ......................... clear packet counters
ver ............................ display IRIS version