Intel 410T - Manual (Page 4)

2
5 6 7 8
2
Quick Start
Install the Switch
Check the
Connections
• Check the port LEDs to confirm the link
status.
• A solid green LED (on the left) indicates
a valid link.
Left (Green/Orange)
Solid Green = Link
Blinking Green = Activity
Blinking Orange = Collision
Right (Orange)
Off = 100Mbps
Solid = 10Mbps
MDI/ MDI-X 1
9
2
10
3
11
4
12
5
13
6
14
7
15
8
16 Left
Right
Link = Solid Green Activity = B linking Gree n Collision = B linking Oran ge 10Mbps = S olid Orange 100Mbps = O ff
Intel ® Express 410T Standalone Switch
Status
Rack: Use the three small
screws to attach the
brackets to the switch.
Shelf: Peel off the protective
backing and attach the rubber
feet to the switch.
3
1
English
• Remove the switch and parts from the box.
• Attach the enclosed brackets if you plan
to mount the switch in a rack.
• Install the Intel ® Express 410T Standalone
Switch in a rack or on a shelf.
• Plug in the power cord.
Connect
the Devices
• All ports automatically detect the speed
and duplex-mode of any connected
device.
• Connect PCs and print servers to the
switch with straight-through cables.
• Use a crossover cable to connect a switch
to another switch or hub.
• Use a straight-through cable to connect to
another switch or hub when port 1 is set
to MDI.
• Use only CAT 5 UTP cable to connect
100Mbps devices. To connect 10Mbps
devices, use CAT 3, 4, or 5 UTP cable.
10/100
10/100
Switch Hub or Switch
Switch Print Server
Switch PC/Server
straight-through
From To
Switch Hub or Switch
straight-through
when port 1 set to MDI
crossover