IBM Partner Pavilion iLC300 - Manual (Page 28)

v Specify blank screen colors and startup logos.
v Specify the menu language.
Shutting down the projector
The projector automatically displays a black screen after no active source is
detected for 30 minutes. This black screen helps preserve the life of the projector.
The image returns when an active source is detected or a remote or keypad button
is pressed.
Screen save
You can make the black screen appear after five minutes by turning onScreen Save
in the Settings -> System menu. There are six time options for the Screen Save
feature. They range from five minutes to 30 minutes with five minute intervals.
Power save
The projector also has a Power Save feature that automatically turns the lamp off
after no signals are detected for 20 minutes. After 10 additional minutes with no
signal, the projector powers down. If an active signal is received before the
projector powers down, the image is displayed. You must press the Power button
to display an image after 30 minutes have passed. When Power Save is enabled,
Screen Save is disabled.
Turning off the projector
To turn off the projector, press the power button and verify that you want to turn
the projector off by pressing the power button again within 3 seconds. You can
cancel the shutdown by not pressing the power button a second time. The lamp
turns off and the LED blinks green for 1 minute while the fans continue to run to
cool the lamp. When the lamp has cooled, the LED lights green and the fans stop.
Unplug the power cable to completely power off the projector.
18 IBM iLC300 Conference Projector: IBM iLC300 Conference Projector User’s Guide