Inter-Tel USER GUIDE 8525 - Manual (Page 4)

2
P LACING A C ONFERENCE C ALL
1. While on the first call, press and dial to place the call on hold
2. Place an intercom or outside call. Then press and the flashing line
number to place the call on hold. (If necessary, repeat this step to place a
third call on hold.)
3. Press and dial to join all of the calls together in the conference.
F
ORWARDING
C
ALLS
1. EITHER, Press , and dial .
OR, press and dial one of the call forwarding feature codes.
2. Do one of the following:
• To forward to an outside telephone number: Press , select an
outgoing line, and dial a telephone number.
• To forward to an extension number: Dial the extension number.
• To forward to your voice mailbox: Press
and dial . Then
press to hang up.
To cancel call forwarding:
Press ,
and dial , then press .
R ESPONDING TO A W AITING C ALL
If you hear a “call waiting” tone do one of the following:
EITHER, End the current call by pressing . When the waiting call
rings, answer as usual.
OR, Place the current call on hold by pressing
. Then answer the wait-
ing call by pressing and then the flashing line number.
C
HANGING THE
V
OLUME
Press once.
R EDIALING A N UMBER
Press , , and dial . The number is automatically dialed.
P AGING
1. Press and dial .
1. Dial the desired zone number (0-9).
2. After the tone, make your announcement.
3. Press to hang up.
FNC 5
LINE
FNC 5
START FNC 2
START
LINE
FNC 6
END
START FNC 2 # >
END
HOLD
LINE
VOL
START FNC 7
START 7
END