Mo ving o n – Inter-Tel USER GUIDE 8525 User Manual
Page 67
55
Inter-Tel
®
Model 8524/8525 User Guide
MO
VING O
N
To store a number in a Speed-Dial location:
1.
Press
and dial
.
2.
Dial the location code 0-9 to be programmed.
3.
Enter the desired name for the speed-dial number to be programmed, as
described below:
• Alphanumeric mode: Press the dialpad buttons to enter the desired charac-
ters. (Refer to the chart on
.) The number of times a button is pressed
determines which character is entered. For example, 533266 would enter
“JEAN.” When adjoining characters are located under the same button, press
o n c e t o a d v a n c e t o t h e n ex t c h a r a c t e r. F o r e x a m p l e ,
66
6667776 would enter “NORM.” (Note that letters correspond to
the letters printed on dialpad buttons 1-9.) Press
twice to leave a
space. Press the Backspace button (e.g.,
) if you need to back-
space.
NOTE:
To use the Backspace button, you must pre-program one of the fea-
ture buttons on your endpoint to use the Backspace button (feature code 314).
Refer to
, Programming You Feature Buttons section for details on
how to program the backspace button.
• Press
to save the name.
4.
Dial the extension number or telephone number to be stored.
• Numeric mode: Press
and then press the dialpad buttons to dial
the desired numbers.
NOTE:
If your number includes an asterisk, pound, hookflash, or pause,
change the mode to the alphanumeric mode by pressing
and then
enter the special character. Press
to move to the next space. If
necessary, press the Backspace button (e.g.,
) to backspace and
make corrections.
• Press
to save the number.
NOTE:
To dial outside telephone numbers without first selecting an outgoing line, enter
a line access code (such as the Outgoing Call code “8”) at the beginning of the outside
telephone number.
START
3
8
3
FNC
2
FNC
2
FNC
2
FNC
3
# >
FNC
6
FNC
6
FNC
2
FNC
3
# >