Invacare Auriga10 - Manual (Page 54)

54
10.1.1.4 Repairing the flat tyre
Requirements (General)
•
Repair kit for inner tubes or an new inner tube.
•
Talcum powder
•
Socket spanner, 13 mm
Requirements (3-Wheel Version - front wheel):
•
Allen key, 6 mm
•
Remove the valve cap.
•
Let the air out of the tyre by pressing the pin in the
centre of the valve in.
•
Remove the 4 nuts (1) from the rear of the wheel
using the 13 mm spanner (3-Wheel Version - front
wheel: counter the bolts from the other side using
the 6 mm Allen key).
•
Remove the rim halves from the tyre and take out
the inner tube.
•
Repair the inner tube and re-fit, or replace it with a
new one.