Intellinet Network Solutions PRO SERIES INT-PSNC-UM-1106-06 - Manual (Page 67)

- 67 -
c) The camera live video displays in the camera viewer software.
Adding a MPEG4/Motion-JPEG capable camera works similarly, though there are some
differences:
What you need:
1. IP Address of camera
2. Guest username and password (admin credentials may also be applied, but are not required)
3. Web Server port settings of camera (default: 80).
4. Camera must be set to either Single mode (JPG ONLY) or Dual-Mode as shown below:
For detailed instructions on the functions of the software refer to the user manual on the CD.