IBM V7.2 - Manual (Page 34)

Standby Database Scenario 28
Standby database scenario
This scenario starts with the SAP R/3 system TS1 running on the Primary server. On the
Backup server, TS1 is stopped and the DB2 filesystems for data and logs are
unmounted. This scenario assumes that the FlashCopy pairs and tasks are already
defined on the ESS Copy Services Server.
Because the standby scenario requires logs from the Primary database to be applied to
the Backup database, configure the SAP DB2 userexit program to copy the log files to
the Backup server. Ship the archive logs to the Backup server so that the Backup
database can apply these logs. To do this:
1. NFS-mount the log directory of the Backup system (TS1 on MACHB).
2. In the configuration file initTS1.db6 in the directory
/usr/sap/TS1/SYS/ global set the value of the variable
DB2DB6_STANDBY_DIR to the NFS-mounted log directory of the target
system .
For more details on how to configure the SAP DB2 administration tools, see the SAP
manual SAP Database Administration Guide: IBM DB2 Universal Database for UNIX and
Windows that is also available at
http://service.sap.com/installguides .
1. Issue the suspend command on the Primary database:
db2 “connect to ts1”
db2 “set write suspend for database”
2. Flash the data pairs from the Primary server:
/usr/opt/ibm2105cli/rsExecuteTask.sh –v –s ESSCSS ts1dbdata
Attention: For this scenario, do not copy or make available to the Backup server
the
/db2/TS1/log_dir file system on the Primary server at this point.
3. Wait for the FlashCopy task to finish.
4. Issue the resume command from the same connection used in step 1:
db2 “set write resume for database”
5. Mount the data filesystem on the Backup server:
mount /db2/TS1/db2ts1/NODE0000
mount /db2/TS1/sapdata1
mount /db2/TS1/sapdata2
mount /db2/TS1/sapdata3
mount /db2/TS1/sapdata4
mount /db2/TS1/sapdata5
mount /db2/TS1/sapdata6
mount /db2/TS1/sapdata7