5 set up power over ethernet (optional) – Zyxel NWA-3500 User Manual

Page 14

Advertising
background image

ENGLISH

14

Run the connection cables down the back of the NWA-3500 as shown in the following
figure.
OR:
Run the connection cables upward and along the edge of the ceiling.

5 Set Up Power over Ethernet (Optional)

Power over Ethernet (PoE) is the ability to provide power to your NWA-3500 via an 8-pin
CAT 5 Ethernet cable, eliminating the need for a nearby power source.

A PoE injector (not included) is also needed to supply the Ethernet cable with power. This
feature allows increased flexibility in the location of your NWA-3500.

In the following figure, Z is your NWA-3500, A is the CAT 5 Ethernet cable, B is the PoE
injector and C is the power cable.

3 Align the holes on the back

of the NWA-3500 with the
screws on the wall. Hang
the NWA-3500 on the
screws.

Advertising
This manual is related to the following products: