Warning, Cleaning the spray arms, How to keep your dishwasher in shape – Indesit Dishwasher ICD User Manual

Page 17: Installation instruction, Installation preparation, Attention

Advertising
background image

 

 

 

15

 

Cleaning the Spray Arms

The spray arms can be easily removed for periodic cleaning of
the nozzles, to prevent possible clogging. Wash them under
running water and carefully replace them in their seats, checking
that their rotary movement is in no way impeded.

Grasp the middle of the spray arm, pull it up wards to remove it.
Wash the arms under a jet of running water and return them
carefully to their seat. After reassembly, check that the spray
arms turn freely. Otherwise, check that they have been installed
correctly.

How to Keep Your Dishwasher in Shape

„ After Every Wash

After every wash, turn off the water supply to the
appliance and leave the door slightly open so that
moisture and odors are not trapped inside.

„ Remove the Plug

Before cleaning or performing maintenance, always
remove the plug from the socket.

„ No Solvents or Abrasive Cleaning

To clean the exterior and rubber parts of the
dishwasher, do not use solvents or abrasive cleaning
products.
Only use a cloth with warm soapy water.
To remove spots or stains from the surface of the
interior, use a cloth dampened with water with a little
vinegar, or a cleaning product made specifically for
dishwashers.

„ When it is not in need for a long time

It is recommend that you run a wash cycle with the
dishwasher empty and then remove the plug from the
socket, turn off the water supply and leave the door of
the appliance slightly open. This will help the door
seals to last longer and prevent odours from forming
within the appliance.

„ Moving the Appliance

If the appliance must be moved, try to keep it in the
vertical position. If absolutely necessary, it can be
positioned on its back.

„ Seals

One of the factors that cause odors to form in the
dishwasher is food that remain strapped in the seals.
Periodic cleaning with a damp sponge will prevent this
from occurring.

8. Installation Instruction

Installation preparation

The installation position of dishwasher should be near the existing inlet and drain hoses and
power cord.
One side of the cabinet sink should be chosen to facilitate the connection of drain hoses of the
dishwasher.

Warning

Attention

The installation of the pipes and
electrical equipments should be done
by professionals.

Electrical Shock Hazard Disconnect
electrical power before installing
dishwasher.

Failure to do so can result in death or
electrical shock.

Advertising
This manual is related to the following products: