IBM Tape Library Magstar 3494 - Manual (Page 133)

VTS Physical device mount history
Displays VTS Physical device Mount history (See Figure 74 on
page 128.)
VTS Logical Mounts per hour
Displays VTS Logical Mounts per hour statistics (See “VTS Logical
Mounts Per Hour” on page 129.)
Active Data Distribution
Displays VTS Active Data Distribution statistics (See Figure 76 on
page 130.)
System summary
Displays subsystem status. (See “Using the System Summary” on
page 131.)
LAN Status
Displays LAN status. (See “LAN Status” on page 135.)
Dual accessor zones
Displays frames serviced by each accessor. (See Figure 79 on page 136.)
Operational Status
Figure 61 shows the top half of the Operational Status pop-up window. Figure 62
shows the bottom half of the Operational Status pop-up window for systems that
only have a single accessor. Figure 63 on page 114 shows the bottom half of the
Operational Status pop-up window for systems that have dual accessors.
Figure 61. (Part 1 of 3) Operational Status Pop-Up Window
Chapter 6. Advanced Operating Procedures 111
|
|
|
|
|
|
|
|
|
|