IBM Janam XM60 - Manual (Page 15)

XM60 User Manual
3-2 Janam Technologies LLC
9. Select scan.
• Point the scanner at a barcode, and press any of the barcode scan
trigger buttons on the XM60. The results will display after a
successful scan.
Enable the ScanWedge feature
When the ScanWedge feature is enabled, data can be entered into the
specified application by opening the application on the handheld and
scanning a barcode.
1. Go to MS Windows icon > programs > XM60 applications >
ScanWedge.
2. Select enable from the ScanWedge menu.
3. Choose setup > symbology config from the top menu. You can then
select enable all to enable every type of barcode or manually select the
barcode symbologies you need.
4. Tap OK.
Note: The ScanWedge function will be disabled if manual scanning is initiated
either by a command API or by using the Janam Barcode Test program.
Unlock 2D scanning
All of Janam’s mobile computers can be upgraded in the field to read both 1D and 2D barcodes with a
simple firmware upgrade (Part Number 2D-XP-1). With each upgrade, a key code is provided that unlocks
2D scanning capability on the device. To purchase an upgrade for your XM60, contact your authorized
Janam dealer.
You will need to provide the product imager ID number so the appropriate five-digit key code sequence
can be assigned. To access the imager ID number, follow these steps:
To get your imager ID number:
1. Tap the MS Windows icon or start menu > settings > XM60 panel.
2. Select Info.
• The scanner ID info shows the unique number for each XM60 device.