IBM Janam XM60 - Manual (Page 20)

XM60 User Manual
4-1 Janam Technologies LLC
4
Set up your Janam XM60
Locate front panel controls
• Power button (on top of device). Pressing the power button turns the handheld
computer on (if it is off) and returns to the last screen that was displayed. Press the
power button to turn the handheld computer off.
• Use the backlight to illuminate the screen in low-light conditions. Hold down the
power button for about two seconds to turn the backlight on and off.
• Janam XM60 screen. Displays the applications and data stored in your handheld
computer. It is touch-sensitive and responds to the stylus.
Locate back panel components
• Stylus channel. Holds the stylus. To use the stylus, remove it from the channel and
hold it as you would a pen or pencil.
• IR port. Uses infrared technology to transmit and receive data to and from other
handheld computers, and to perform ActiveSync operations.
• Reset button (located under battery cover). Under normal use, you should not
have to use the reset button.
• USB/serial connector. Connects your handheld computer to a PC via a USB or
serial cable or by inserting XM60 into a Janam cradle.
Tap versus click
Tapping is the basic action used to execute tasks, so use the stylus to tap elements on your handheld
computer’s touch-sensitive screen. You can drag the stylus to select text, or use the stylus to drag the
slider of any scroll bar.
IMPORTANT: Always use the point of the stylus for tapping or making strokes on the handheld computer
screen. Do not use a pen, pencil or any other sharp object to write on the screen.
Recalibrate the screen
The first time you start the Janam XM60 handheld computer, setup instructions appear onscreen. These
instructions include a calibration screen, or digitizer. Calibration aligns the internal circuitry of the
handheld computer with its touch-sensitive screen so your handheld computer can detect the task you
want to perform when you tap an element on the screen. You can also recalibrate your screen at any time.
To recalibrate your screen:
1. Tap the MS Windows icon > settings > control
panel > stylus.
2. Select double tap menu, and follow the
instructions.
3. Tap calibration menu, and follow the on-screen
instructions, tapping the screen where indicated.