Invacare PRONTO R2-250 - Manual (Page 42)

42
9. Install the battery box(es) into the wheelchair. Refer
to INSTALLING/REMOVING BATTERY BOX(ES) in
this procedure of the manual.
NOTE: New Battery(ies) MUST be fully charged BEFORE
using, otherwise the life of the battery(ies) will be reduced.
10. If necessary, charge the battery(ies). Refer to
CHARGING BATTERIES in this procedure of the
manual.
PROCEDURE 11 BATTERIES
B
A
T
T
E
R
I
E
S
DETAIL “A”
DETAIL “B”
NOTE: Battery clamps exploded away for clarification purposes only.
Mounting Plate
FIGURE 6 - CONNECTING BATTERY CABLES - BATTERY CLAMP METHOD
CONNECTING BATTERY CABLE(S) TO BATTERY(IES) TERMINAL(S)/POST(S)
Hex Screw
Negative (-) BLACK
Battery Cable
Positive (+) RED
Battery Cable
Battery Clamp
POSITIVE (+) Battery Terminal/
Post and Battery Clamp
NEGATIVE (-) Battery Terminal/
Post and Battery Clamp
Positive (+) RED
Battery Cable
Negative (-) BLACK
Battery Cable
Group 22NF Battery
POSITIVE (+) Battery
Terminal/Post
Mounting Plate
Group 22NF Battery
NEGATIVE (-) Battery Terminal/Post
TOP VIEW
EXPLODED
VIEW
RED Battery Clamp Cover
NEGATIVE (-) Battery
Terminal/Post
Tie-Wrap
BLACK Battery Clamp Cover Group 22NF Battery
Tie-Wrap
POSITIVE (+) Battery
Terminal/Post