ILY Enterprise 3 - Manual (Page 14)

Copyright©2005 ILY Enterprise, Inc. All rights reserved. 14
Press ENT again and use the arrow button
to select the session. The LCD will show the information
in the session.
Press ENT again and use arrow button to select
the track. The LCD will show track information.
4.9.4 Compare Image
Use this function to compare the contents of the source DVD and those of the image file in the
partition. First select the function by pressing the arrow.
Press ENT and LCD will show the comparison
information as such:
LCD will then show the following message:
When the process is finished, the LCD will display
the results as such:
Press ENT to view the comparison details.
If the comparison is identical, the LCD will
show the message as such:
If comparison fails, the LCD will show the number of discs
that have failed and succeeded.
Press ENT to see the comparison
information.
If the comparison fails, the LCD will show the
following message:
4.9.5 Select Partition
This function, select Partition, allows you to select a partition in the hard disc.
Press ENT button to change the setting.
After installing a hard disc, the duplicator will format it automatically. Each partition occupies 1GB.
The number of partitions is dependent on the hard disc’s capacity. The partitions are
alphabetically arranged.
Session 01
Track 01 - 01
Track 01
DATA 650.0MB
9-04. Image P: A
Compare Image
Comp-A-24X 0%
650.0MB 74:00
Compare OK: 1
Fail: 0 Diff: 0
Src: 01 CD-ROM
Total: 650.0MB
Tgt: 00 HDD P:A
Identical
Compare OK: 0
Fail: 1 Diff: 0
Src: 01 CD-ROM
Total: 0 Bytes
Src: 02 DVD+RW
TOC not match
9-05.Image P: A
Select Image