ILY Enterprise 3 - Manual (Page 4)

Copyright©2005 ILY Enterprise, Inc. All rights reserved. 4
Chapter 1 Introduction
1.1 Overview
People who want to create multiple copies of their DVDs or CDs usually take a long time to do so.
They might not have enough DVD+RW drives or they might be using their computers for some
other important tasks. The duplication process noticeably slows down a computer during the
burn process. Rather than sit at the computer for hours duplicating discs one at a time, it is much
more efficient to use a CoolCopyD DVD/CD duplication system.
The CoolCopyD DVD Duplicator system is a standalone duplicator and does not need to be
connected to a computer. It can duplicate discs accurately and quickly. With its multi-function
LCD panel, CoolCopyD DVD Duplicator is easy for any user to operate. It is a cost-efficient DVD-
R duplicator for audio, data, and video applications. The simple control panel is designed to
provide copy mode selection and copy operation.
1.2 Features
• Standalone IDE to IDE DVD Copy controller
• 2(CoolCopyD1AL(DVD-Backup)) / 4(CoolCopyD3) / 8(CoolCopyD7) /
16(CoolCopyD14)
independent IDE channel
• Self system diagnostics when power on
• Supports Hard Drive image
• Auto format detection
• User friendly interface with message rich LCD display
• Fast copies supports high speed DVD-RW writing mode
• Easy operation without software and training are required
• Firmware upgrade via DVD-ROM
1.3 Specification
Power requirement – voltage: 5VB+/- 5%
Current: 0.5A Max.
Environment - Temperature
Operating 0˚ C to 70˚ C
Storage -20˚ C to 85˚ C
Humidity - 15% to 90%
Models: CoolCopyD3/CoolCopyD7
Dimensions - Length: 200 mm
Width: 146.2 mm
Height: 42 mm
Connectors - 40-pin internal IDE connector
Cable (Optional) - Using ATA-66 (*Cable of length do not use longer than 46cm)
DVD Format - DVD-ROM (Mode1 & Mode2), DVD-ROM/XA (Mode2 form1 & form2),
DVD-DA,
Mixed-Mode, Video DVD, DVD-I, Karaoke CD, Photo CD (Single & Multi-
session), CD-Extra, HFS, CD Bridge, ISO9660, CD-R, and DVD+RW