Intel GA-EQ45M-S2 - Manual (Page 42)

GA-EQ45M-S2 Motherboard - 42 -
2-4 Standard CMOS Features
Date
Sets the system date. The date format is week (read-only), month, date and year. Select the
desired field and use the up arrow or down arrow key to set the date.
Time
Sets the system time. For example, 1 p.m. is 13:0:0. Select the desired field and use the up arrow
or down arrow key to set the time.
IDE Channel 0, 1 Master/Slave
IDE HDD Auto-Detection
Press <Enter> to autodetect the parameters of the IDE/SATA device on this channel.
IDE Channel 0, 1 Master/Slave
Configure your IDE/SATA devices by using one of the three methods below:
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
Standard CMOS Features
: Move
Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level
Base Memory 640K
Extended Memory 510M
Total Memory 512M
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
Standard CMOS Features
Date (mm:dd:yy) Thu , Nov 6 2008
Time (hh:mm:ss) 17:31:24
 IDE Channel 0 Master [None]
 IDE Channel 0 Slave
[None]
 IDE Channel 1 Master
[None]
 IDE Channel 1 Slave
[None]
 IDE Channel 2 Master [None]
 IDE Channel 3 Master [None]
 IDE Channel 4 Master [None]
 IDE Channel 4 Slave
[None]
 IDE Channel 6 Master
[None]
 IDE Channel 6 Slave
[None]
Drive A [1.44M, 3.5"]
Floppy 3 Mode Support [Disabled]
Halt On [All, But Keyboard]
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level