Iiyama AQU5611DTBK User Manual
Page 18
4. Press the power switch on the monitor. The power light comes on.
Power switch
Power lighit
Notes:
a. When you turn off the monitor, wait at least five seconds before turning it on
again.
b. If you accidentally disconnected the power cord from the main outlet and
you connected it to the outlet again, the screen may flicker continuously. To
stop the flicker, press the power switch and turn off the monitor, then turn it
on again.
c. Refer to “Knowing the operating status of your monitor” on page 16 for more
information on the power light.
This completes the hardware setup.
Supplementary Information
When powering on the different units, power them on in the following
sequence:
1. Monitor
2. Peripheral units
3. Computer
10
AQU5611D BK/AQU5611DT BK 9.2 Million Pixels Color TFT LCD Monitor USER MANUAL