Intel 4 - Manual (Page 7)

•
Reset 29 inch NEC Multisync to factory default settings
The Intel® TeamStation™ System ships with an optional Monitor. Use the following instructions to reset the NEC
MultiSync* 29 inch monitors to factory defaults.
Default Settings for the NEC MultiSync* XV29:
Press the "Recall" key on the remote control and use the following information to verify the settings.
Volume 112
Mute off
Woofer on (****should be off****)
Brightness 128
Contrast 195
V-size 156
V-position 78
H-size 210
Pincushion 189
Rotation 125
Bass 120
Treble 113
Balance 128
Default Settings for the NEC MultiSync XM29:
Dip switch settings are located on the back of the monitor.
Dip SW-1:
on off on off off off off on
1 2 3 4 5 6 7 8
Dip SW-2:
off off off off off off off on
1 2 3 4 5 6 7 8
•
Dashboard-like Utility
The Dashboard-like utility is designed to keep track of the status of both B (bearer) channels on your ISDN line
during an Intel® TeamStation™ System connection. The Dashboard-like utility puts an icon in the systray to
graphically monitor the B channels. The icon has 2 columns, and each column has 4 color bars. The columns
represent each of the B channels, and the bars represent the progress of the connection.
How to use the Dashboard like utility
Watch the lights on the icon. On the first column, rows 1 and 2 should turn yellow, and then rows 1,2,3,4 turn
green when first making a connection. Row 4 may turn red or row 3 may turn blue, briefly. This is normal. If they
stay red or blue, then there is a problem. Next, the second column should repeat the process.
Description: Dashboard displays (after Succeeding):
Establish a connection (First and Second rows turns Yellow)