Interquartz IQ333 - Manual (Page 8)

7
ELECTRONIC VOLUME CONTROL
Used to adjust 4-steps the volume of the HANDSET, HEADSET or HANDSFREE hearing
level. Press (vol-) or (vol+) to adjust the volume. Adjusting this control does not affect
your outgoing voice level.
RECALL KEY
For use with host telephone systems to invoke special network facilities such as call-
hold or call-transfer available in your system.
HANDSFREE / HEADSET KEY AND INDICATOR (with auto-dection)
When the HANDSFREE / HEADSET KEY is pressed a red indicator will glow to indicate
that the HANDSFREE mode or HEADSET mode is activated.
MUTE KEY AND INDICATOR
When pressed, it cuts off transmission from the handset,handsfree and headset
microphones to allow user privacy. The red light indicates when the mute condition is
active. To release the mute condition press MUTE again.
BASIC OPERATION
This telephone can be used as a normal telephone; lift the HANDSET to answer an
incoming call, or lift the HANDSET and dial on the KEYPAD to commence an outgoing
call. Please refer to the appropriate sections to learn more about advanced operating
instructions.
REDIAL / PAUSE KEY
Redial Function
Press to redial the last number previously dialed, which may be up to 32 digits long.
Dialing more than 32 digits during one call will cause erasure of the entire number from
the redial memory.
EXAMPLE : TO REDIAL LAST NUMBER
1. Lift HANDSET, or press HANDSFREE / HEADSET KEY
2. Press REDIAL .