IBM ADSL Bridge/ Router Heritage - Manual (Page 136)

Heritage Series ADSL Bridge/ Router
8-13 DHCP Server Operation
option host-name
strin g;
This option specifies the name of the client. The name may or may not
be qualified with the local domain name (it is preferable to use the
domain-name option to specify the domain name). See RFC 1035 for
character set restrictions.
option boot-size
uint1 6;
This option specifies the length in 512-octet blocks of the default boot
image for the client.
option merit-dump strin g;
This option specifies the path-name of a file to which the client’s core
image should be dumped in the event the client crashes. The path is
formatted as a character string consisting of characters from the NVT
ASCII character set.
option domain-name
strin g;
This option specifies the domain name that client should use when
resolving hostnames via the Domain Name System
option swap-server ip-addres s;
This specifies the IP address of the client’s swap server.
option root-path strin g;
This option specifies the path-name that contains the client’s root disk.
The path is formatted as a character string consisting of characters
from the NVT ASCII character set.
option ip-forwarding
fla g;
This option specifies whether the client should configure its IP layer
for packet forwarding. A value of 0 means disable IP forwarding, and
a value of 1 means enable IP forwarding.
option non-local-source-routing
fla g;
This option specifies whether the client should configure its IP layer
to allow forwarding of datagrams with non-local source routes. A
value of 0 means disallow forwarding of such datagrams, and a value
of 1 means allow forwarding.