IBM ADSL Bridge/ Router Heritage - Manual (Page 39)

3-8 Basic Configurations
(use the same VPI/VCI of RFC 1577 setting)
> config save
↵
> restart
↵
Remove all existing IP module configuration device
> home
↵
> ip device flush
↵
> config save
↵
> restart
↵
We are ready for RFC1577 setup
Specify the gateway (RFC1577 on ISP/DSLAM site and Ethernet on local
PC site)
> home
↵
> ip device add ethernet ether //edd 202.1.136.254
↵
> ip device add ipoa atm //atm 192.168.1.2
↵
> config save
↵
> restart
↵
Enable forwarding between router interface
> home
↵
> ip relay all
↵
> ip ipatm pvc add ipoa r1483 x/y remoteip 192.168.1.1
↵
(‘ x’ is the VPI, ‘ y’ is the VCI. Check with your service provider)
> config save
↵
> restart
↵