IOGear GUWH104KIT - Manual (Page 28)

28
Frequently Asked Questions
Problem: 1.
WiCenter UWB Software reports errors when trying to use the Wireless USB Host
Adapter and Wireless USB Hub on Windows XP operating system.
Solution: Verify that Service Pack 2 (SP2) has been installed on your PC.
Problem: 2.
No LEDs lighting up on the Wireless USB Hub
.
Solution: Check the power supply’s connection to the Wireless USB Hub.
Problem: 3.
No LED on the Wireless USB Host Adapter.
Solution: Re-insert the Wireless USB Host Adapter into USB port.
Problem: 4.
LED does not light up after inserting a USB device into a peripheral port on the
Wireless USB Hub.
Solution: Remove the Wireless USB Host Adapter from the PC and disconnect the power supply
from the Wireless USB Hub. Re-insert the Wireless USB Host Adapter and reconnect power to the
Wireless USB Hub.