IBM 19 - Manual (Page 56)

Installing the Cleaning Pad and Oil Bottle
The cleaning pad removes printing debris (such as excess toner and
paper dust) from the fusing unit. The oil keeps toner from sticking
to the fuser rollers. Instructions for installing the cleaning pad and
oil bottle are given in this section. Replacing the cleaning pad and
oil bottle are covered in chapter 6, “Consumables and Preventative
Maintenance.”
To install the cleaning pad and oil bottle
1. Remove the cleaning pad and oil bottle from their protective
bags.
Chapter 2
2 - 2 4 I n i t i a l P r i n t e r S e t u p
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500